Eolos Lidar Molas CL Laser Safety Level Class 1 Bankable wind lidar

| Product introduction

MolasCL can only be used for the clearance measurement of engine room installation, and can be installed at any position inside or below the fan engine room cover by opening holes The laser beam can pass through the engine hood and can also be installed outside the engine hood. Through the calibration process, the radar laser beam forms an inclination towards the impeller surface, which makes
The light beam is located at the lowest position of the impeller (at the height of the blade tip) at the clearance point to be monitored. When the blade runs, bends towards the side of the tower and touches the light beam, the radar is The radial distance between the blade and it can be measured, and the clearance value can be calculated through a certain inversion algorithm.

| Application scenarios

MolasCL is equipped with three beam ranging and a set of special algorithms, including strong light (sunlight) interference filtering, rain, snow, sand and dust interference filtering, cluster fog interference recognition and dense fog recognition

| Product parameters

| Product Features

MolasCL is equipped with three beam ranging and a set of special algorithms, including strong light (sunlight) interference filtering, rain, snow, sand and dust interference filtering, cluster fog interference recognition, dense fog recognition and other functions. Combining the advantages of MolasCL laser pulse high repetition frequency and its high-performance computing platform's large flux data processing, it can greatly improve the data efficiency, reduce the false alarm rate and maintain high real-time, It is helpful for the wind turbine master to react quickly and avoid the impact on power generation due to false alarm

| Product Image

MOVELASER

Nanjing Movelaser Co., Ltd., established in 2015, is a leading innovator in the development and application of coherent wind LiDAR systems. We have introduced a range of dynamic wind LiDAR products, including ground-based, nacelle-mounted, and 3D scanning systems. Our products have achieved CE and ETL certifications, and their performance parameters have been validated by renowned wind energy assessment organizations such as DNV-GL, Windguard, DTU Risø , and the China Meteorological Administration. We have actively participated in international IEC and domestic wind industry standard-setting initiatives.

With a team of over 300 employees, including more than 100 technical professionals, we have obtained more than 100 core intellectual property rights and achieved breakthroughs in key technologies such as high-energy all-fiber single-frequency lasers, micro-nano weak signal detection, high-speed data processing and accurate inversion algorithms, and robust system control. We possess end-to-end capabilities for complex optoelectronic system development, including research, engineering, manufacturing, and testing.

Our achievements have been recognized through various honors and qualifications, including being designated as a national high-tech enterprise, a national specialized and new "Little Giant" enterprise, a national intellectual property advantageous enterprise, a potential unicorn enterprise in the southern Jiangsu region, a demonstration enterprise for transformin.